How To Look At A House
McGarry and Madsen's home inspection blog for buyers of
site-built, mobile/manfuactured and modular homes
How do I find the size in tons of a Tappan air conditioner or heat pump from the model number?
Saturday, October 2, 2021
You can determine the “nominal” condenser tonnage of your HVAC system by examining the model number on the data plate at the side of the condenser (outdoor unit). Just like the nominal size of lumber or an air conditioning filter, the exact cooling capacity may be a little more or less than the nominal rating, but it’s close.
For Tappan, you should look for the two numbers in the second cluster of digits of the model number, which will be divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 36 divided by 12 equals 3, so the data plate below indicates the system is 3 tons.
Here’s a rundown of the range you will encounter: 18 = 1.5 tons, 24 = 2 tons, 30 - 2.5 tons, 36 = 3 tons, 42 = 3.5 tons, 48 = 4 tons, and 60 = 5 tons. And this is another one that is 4 tons.
If you are unsure whether you have found the right two numbers, you can double-check it by looking for the “RLA” rating on the data plate. RLA is an acronym for Rated Load Amperage, and is what the maximum amperage should be when the condenser up and running. If you divide the RLA by 6 for older units and 5 or 6 for newer units, you should get a number that approximates (not exactly) the tonnage of the system. Make sure you use RLA and not LRA, Locked Rotor Amperage, which is the surge of amps necessary to overcome inertia and start the system. It averages around five times the RLA.
To determine the age of a Tappan system, go to our blog post How can I tell the age of a Tappan air conditioner or heat pump from the serial number?
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To learn more about heating and air conditioning systems, see these other blog posts:
• How can I find out the SEER of my air conditioner?
• My air conditioner won't turn on. What's wrong?
• How can I find out the size of my air conditioner?
• How can I find out the age of my air conditioner or furnace?
• How can I tell whether the condenser (outdoor unit) is an air conditioner or heat pump?
• Where is the air filter for my central air conditioner and furnace? I can’t find it?
• Does an old air conditioner use more electricity as it ages?
• How did homes stay cool in Florida before air conditioning?
• What is wrong with an air conditioner when the air flow out of the vents is low?
• Why has the thermostat screen gone blank?
• Why does it take so long to cool a house when an air conditioner has been off for a while?
• Why is my air conditioner not cooling enough?
• What are the most common problems with wall/window air conditioners?
• Will closing doors reduce my heating and cooling costs?
Visit our HEATING AND AIR CONDITIONING page for other related blog posts on this subject, or go to the INDEX for a complete listing of all our articles.
of Blog Posts
Top 5 results given instantly.
Click on magnifying glass
for all search results.
Buying a home in North/Central Florida? Check our price for a team inspection by two FL-licensed contractors and inspectors. Over 8,500 inspections completed in 20+ years. In a hurry? We will get it done for you.